Communicate with Supplier? Supplier
Gordon XIONG Mr. Gordon XIONG
What can I do for you?
Chat Now Contact Supplier
HSI INDUSTRIEL LTD
HomeProductsAluminum Alloy CastingLow Pressure Casting Parts

Low Pressure Casting Parts (Total 0 Products)

Product categories of Low Pressure Casting Parts, we are specialized manufacturers from China, Low Pressure Casting Parts, Low Pressure Die Casting Parts suppliers/factory, wholesale high-quality products of Custom Low Pressure Die Casting R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

China Low Pressure Casting Parts Suppliers

"In the low pressure die casting process the metal is transferred from an air tight furnace through a rising tube into a metallic tool. The casting temperature is about 750℃. The tolerance and surface finish are the better achieved than gravity die casting."


The Pressure die casting process has the advantage of excellent process repeatability. Generally, the surface finish of Pressure Die Cast parts is achieved from the surface finish of the tool that produces it.

The liquid alloy is forced under high pressure into a steel tool; the alloy solidifies rapidly and takes the form of the tool along with the finish of the tool. Therefore, a highly polished PDC tool will impart excellent finishes to the cast parts produced from that tool.

Typically, as cast surface finishes achievable are 1,6 Microns or better for Aluminium and Zinc Alloy parts, slightly lower for Brass Alloy parts.

Pressure Die Cast Surface Treatments

Generally, PDC parts are ejected from the tool with excellent surface finishes. Tool split lines, ejector pin flash, and waste gates are cropped off and parts are fine linished to remove any indications completely.

Typically, PDC parts are fine glass bead or Aluminium Oxide Grit Blast finished giving a uniform aesthetically pleasing finish that also improves adhesion for the paint process.

Dependent on the application of the product various surface treatments can be undertaken on Aluminium Alloy parts. From simple Chemical conversion protection or Anodising to Powder Coating to International RAL specs.